Russia Vineyard Chooses Custom Transparent Rain Cover with Eyelet Design
2026-04-29

Custom Rain Cover Made for a Vineyard in Russia
A vineyard customer in Russia needed a transparent rain cover that could be installed quickly and work well in outdoor grape growing conditions.
The customer did not want a normal roll from stock. He needed the cover to match his vineyard setup, so the edges were prepared with evenly spaced holes for direct rope fixing in the field.This way, the material can be installed directly after arrival without extra work on site. Once all requirements were confirmed, production moved forward according to the agreed details.
This order was for a vineyard in Russia, where the cover will be used for grape rain protection. The finished specification is 1.5m × 160m. It uses transparent HDPE with UV treatment, in 150g / 200 microns.
The customer chose this structure because it offers both durability and light transmission, which are important for outdoor grape growing. The target service life is 5 to 10 years under field conditions.Since the cover is transparent, it helps keep natural light for the grapes while reducing direct rain impact during the growing season.
The special part of this order was the edge treatment. Instead of a normal roll, the customer asked for punched eyelets every 20 cm, with each hole at 1 cm diameter. This allowed rope fixing directly onto the vineyard frame. In practical use, this means less extra work after delivery and faster setup in the field.
For products like this, the final result depends on details. The eyelets must be evenly spaced, the edges must stay strong under tension, and the material must handle long periods outdoors. These points were checked carefully during production so the cover could arrive ready for use, not needing additional processing at the farm.
This was not simply about supplying a sheet of material — it was about providing a ready-to-use solution that fits the customer’s real working needs. Projects like this show how custom manufacturing can help farms save time, reduce labor, and achieve better installation results.
Australia Orchard Customer Plans November Installation. When Should Rain Cover Production Start?
How a Bhutan Vineyard Simplified Installation with 1×50m Ready-to-Use Woven Film
Related Article

When we talk with growers, many people tell us the same problem.
Rain is not the biggest problem. Wind is.
In some areas, strong wind comes several times every year. After some time, the rain cover may get damaged, torn, or worn out because of the wind.
To help solve this problem, we made a new rain cover design. It can reduce wind pressure and still keep the rain out.
Rain is not the biggest problem. Wind is.
In some areas, strong wind comes several times every year. After some time, the rain cover may get damaged, torn, or worn out because of the wind.
To help solve this problem, we made a new rain cover design. It can reduce wind pressure and still keep the rain out.
What Can You Do When Strong Wind Damages Rain Covers?

A customer from Australia is now preparing an orchard rain cover project. The target is to finish installation before mid-November. During the discussion, the customer paid special attention to production lead time, shipping time, and rope installation. This is also a question many growers ask before starting a project: how early should a rain cover order be arranged?
Australia Orchard Customer Plans November Installation. When Should Rain Cover Production Start?

A vineyard in Bhutan recently completed its covering setup using custom 1×50m woven film rolls with stitched hems and eyelets. By matching the roll size to the vineyard layout, the team reduced on-site preparation and made installation more practical for daily field use.
How a Bhutan Vineyard Simplified Installation with 1×50m Ready-to-Use Woven Film